1992 Acura NSX Press Kit
1992 Acura NSX - Introduction
To understand how and why Honda built the NSX exotic sports car, it is first necessary to understand the high level of car enthusiasm that permeates every aspect of Honda's worldwide organization. Honda has always been a "racing" company.From its initial interest in motorcycle racing in the '60s to its current dominance in Formula One, Honda has always taken racing as a serious endeavor. And its involvement with motorsports is an integral part of the philosophy of Soichiro Honda, founder of Honda Motor Co., Ltd. He believed that cars, no matter what their market niche, should be amply endowed with a large dose of driving fun. The intention in creating the Acura NSX was to produce a hand-built, exotic, mid-engine sports car that would establish entirely new levels of performance, refinement, driveability and reliability. The NSX is designed to represent an entirely new definition of the exotic sports car.
CONCEPTS AND GOALS
In 1984, the engineers at Tochigi Research and Development Center created a list of attributes the future NSX had to possess:
- Top-rank performance: equal to or greater than existing exotics
- Excellent liveability: the NSX had to be as easy to live with as any other Acura
- Light weight
- Forgiving handling characteristics
- Limited production
The mid-engine, 2-seater NSX is powered by an all-aluminum, 3.0-liter V-6 which produces 270 hp and 210 lbs.-ft. of torque. The normally aspirated engine is equipped with dual overhead cams, four valves per cylinder, a Variable Valve Timing and Lift Electronic Control (VTEC) system, and a Variable Volume Induction System (VVIS) intake configuration. The engine also offers Programmed Fuel Injection (PGM-FI) and a direct ignition system which uses an individual coil mounted atop each spark plug instead of a single coil for the entire system.A 5-speed manual transaxle is standard with an electronically controlled 4-speed automatic available as optional equipment.
The chassis features all-aluminum construction for light weight. The 4-wheel independent double-wishbone suspension also features aluminum alloy control arms and hub carriers front and rear, and aluminum subframes for the front and rear suspension. The braking system features ventilated 4-wheel discs front and rear and an advanced 4-channel Honda R&D-designed Anti-Lock Braking System (ABS). A sophisticated Traction Control System (TCS) has been designed to help limit wheelspin and enhance control on slippery surfaces.
1992 Acura NSX - Powertrain
1992 ACURA NSX POWERTRAIN
The NSX engine is an all-aluminum,90-degree,3.0-liter (2977cc), dual overhead earn, 4-valve per cylinder, V 6 which produces 270 hp at 7100 rpm when mated to the manual transmission, and 252 hp at 6600 rpm when mated to the automatic transmission. The torque rating is 210 lbs.-ft. at 5300 rpm for both manual and automatic transmissions. The redline for the manual is 8000 rpm, while that for the automatic is 7500 rpm. Fuel cutoff is 8300 rpm for the manual and 7800 rpm for the automatic.
An exclusive electronically controlled Variable Valve Timing and Lift Electronic Control (VTEC) system optimizes volumetric efficiency at both high and low engine speeds. A unique Variable Volume Induction System (VVIS) changes the configuration of the intake system with varying engine speeds, working with the VTEC system to broaden the torque curve and increase peak power output.
ENGINE BLOCK, CYLINDER HEADS, CRANKSHAFT
To achieve both light weight and durability, the block is made of aluminum alloy with cast-in-steel cylinder liners. The crankshaft is a fully counter-weighted forged-steel unit. The cylinder heads are low-pressure cast aluminum. The combustion chamber is a pent-roof design with generous squish area to promote swirland enhance combustion efficiency.The spark plug is centrally located for optimum flame propagation and features a platinum tip for improved durability and longer service life.
TITANIUM CONNECTING RODS
The connecting rods are made of a specially patented titanium alloy.While titanium rods are common in Formula One and other race engines, this is the first application of titanium in a production car. Compared to a steel connecting rod for the same engine, these titanium rods each weigh 190 grams less but are significantly stronger.
VARIABLE VALVE TIMING AND LIFT ELECfRONIC CONTROL (VTEC) SYSTEM
Without question, the Variable Valve Timing and Lift Electronic Control (VTEC) system is a breakthrough in engine technology. It convincingly solves the age-old trade-offs between low-end torque and high-end power.
The heart of the VTEC system is a unique camshaft and rocker arm system. Foreach cylinder's set of two intake (or exhaust) valves, there are three corresponding lobes on the camshaft. The two outboard lobes each have a profile suited for low to mid-engine speed operation. The third, or center, cam lobe, has a dramatically different profile designed for longer duration and higher lift~this lobe profile is designed to optimize breathing and horsepower production at high engine speeds. At part throttle and low load operation, this third lobe is inactive and doesn't act on the valves. During high-speed operation, the VTEC computer sends a signal to a spool valve, which in turn delivers engine oil to small pistons in the rocker arms. Oil pressure causes the pistons to slide outward, locking all three rocker arms together. Once locked together, the rocker arms are forced to follow the center cam lobe. The cross-over from low lift to high lift occurs in 0.1 seconds and is virtually undetectable to the driver.
VARIABLE VOLUME INDUCfION SYSTEM (VVIS)
In addition to variable valve timing, the NSX engine also uses a Variable Volume Induction System (VVIS). This system uses a separate intake air plenum, located beneath the main intake manifold. This second plenum is separated from the primary manifold by six butterfly valves, which open between 4600 and 4900 rpm and are actuated by manifold vacuum.
When the valves open, the added volume of the secondary plenum creates a higher resonance frequency,which in turn creates a sonic pressure wave. This sonic pressure wave hits each pair of intake valves just as they open, promoting more rapid and complete cylinder filling.This system was designed to work in concert with VTEC to improve low-end torque.
Programmed Fuel Injection (PGM-FI) ensures that each cylinder receives the precise amount of fuel necessary for the present load and speed conditions. This system has been specially tailored to the unique capabilities of the VVIS and the VTEC system.
DIRECT IGNITION SYSTEM
To ensure a hot, stable spark at high rpm operation, the single-coil ignition system has been superseded by a coil mounted atop each spark plug, a design similar to that used in the Honda Formula One engine.
The standard manual transmission is designed to provide impressive durability, with short shift throws and quick, precise response. A dual-cone synchronizer is used for second gear, for quicker, smoother shifting, and reverse gear is also equipped with synchromesh.
To handle the high torque and power output of the NSX engine, a twin-disc clutch was developed. The twin disc design increases the torque capacity of the unit, while retaining a light clutch feel and reducing rotating inertia.
The optional 4-speed automatic transmission allows the driver to select and hold each gear manually.To enhance smoothness during upshifts and downshifts, an ignition retard control system is used to momentarily reduce engine output. The automatic is also equipped with a programmed lockup torque converter to improve fuel economy and reduce slippage. Lockup is available in third and fourth gear and, unlike other automatic transmissions,it occurs in four increments, rather than one abrupt transition, to provide smooth operation. The transmission is unique in that it maintains lockup while the car is decelerating.
TORQUE CONTROL DIFFERENTIAL
The torque control differential employs a multi-plate clutch and planetary gearset to help maintain vehicle stability at speed in crosswinds and when driving over split friction surface conditions. The unit reacts to the rotational difference between the rear wheels and attempts to maintain the same rate of rotation at both wheels. If the NSX should be forced off the intended direction in a crosswind, the differential will detect the rotational difference between the two rear wheels and transfer torque to the slower rotating wheel. This has the effect of directing the car back into the desired path.
TRACTION CONTROL SYSTEM (TCS)
The goal of the Traction Control System (TCS) was to minimize rear wheelspin on slippery or uneven road conditions. This unique Honda R&D development was created as a high-performance system rather than a pure low-speed traction enhancing device. TCS uses the wheel-speed sensors of the Anti-Lock Braking System (ABS) to detect the rotational differences between the two front wheels. If the computer determines that the surface is slippery, CPU signals are sent to decrease the amount of air and/or fuel delivered to the engine. The driver can elect to disengage TCS by a switch located on the instrument panel.
1992 Acura NSX - Interior
1992 ACURA NSX INTERIOR
CONCEPT AND GOALS
The object was to create an interior that was the sports car equivalent of a jet fighter pilot's helmet. The key elements of this concept were unlimited visibility,a feeling of snugness or intimacy with the interior of the vehicle, and the sense that the cockpit and driver were out in the airstream rather than enclosed and isolated from the environment. To achieve this feeling, the seating space for the driver and passenger was designed to fit snugly at the hips and flow outward and upward to provide ample space for the head and shoulders.
SEATING POSITION AND VISIBILITY
A low seating position contributes to a low center of gravity and helps to reduce the frontal area for improved aerodynamics. Ordinarily, a low hip-point would impart to the driver the feeling of being buried in the interior and create a claustrophobic feeling.To avoid this, the body engineers created a very low cowl section which allowed them to lower the height of the dash and instrument panel. The low cowl also improved vertical visibility.
INSTRUMENTATION AND CONTROLS
In designing the instrument panel, the approach was one of simplicity.Since the primary function of the instruments is to relay information as clearly and quickly as possible, the designers opted for a traditional analog execution.
The instrument faces are round with white numerals on a black background. The instrument panel is dominated by the tachometer on the left and the speedometer on the right. To the left of the tach are the smaller water temperature and oil pressure gauges. To the right of the speedometer are the fuel gauge and voltmeter.
All the major controls are clustered around the steering wheel column to make them easy to reach.
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG
The Supplemental Restraint System (SRS) air bag is mounted in the steering wheel hub; the bag is made of a new silicone-basedmaterial. This thin, strong material allows the bag to be folded into the smaller space of the NSX steering wheel hub. In order for the bag to deploy, the sensor in the interior must "agree" with one of the two other sensors that an impact has occurred. All SRS electrical connectors are goldplated in order to enhance conductibility and provide optimum corrosion protection.
Leather was a natural choice for the seat trim material; it is hand stitched and hand fitted to ensure quality craftsmanship and durability. The seat facings,door inserts, steering wheel and shift knob are covered with leather.
AUTOMATIC CLIMATE CONTROL SYSTEM
A compact Climate Control System has been developed specifically for the NSX. This is a fully automatic system, but the automatic function can be overridden and the system can be used in a fully manual mode.
ACURA/BOSE® MUSIC SYSTEM
Bose® engineers became involved with the NSX sound system at an early stage of interior design. This 4 speaker system was designed and calibrated specifically for the unique acoustics and resonances of the NSX interior and provides the highest quality imaging and spatial dynamics for both the driver and the passenger.
The Acura/Bose® Music System's speakers are precisely aimed so that the pressure wave of the speaker closest to each occupant doesn't overpower the pressure wave from the speaker which is farthest away.This produces a balanced sound from each speaker and the net result is true stereo performance.
The AM/FM stereo cassette features Dolby® and Dynamic Noise Reduction® The auto preset function will automatically lock on eight strong AM and eight strong FM stations and store them into the preset selector buttons. An optional CD changer is available.
A sophisticated alarm system is standard equipment on the NSX. If an unauthorized attempt is made to enter or start the NSX, the horn sounds, the flashers are activated and the ignition system is disabled. The system arms passively 15 seconds after the doors are locked and is disarmed when a door is unlocked with the key.
1992 Acura NSX - Chassis
1992 ACURA NSX CHASSIS
The desired goals for the NSX suspension went well beyond the typical goals of high lateral adhesion, transient response and linear response to control input. The engineers wanted a suspension that allowed the driver to easily control the car right to the limit.
The basic configuration is similar to that of a Formula One car in that it employs an upper and lower control arm (or double-wishbone) design with a coil-over shock absorber and anti-roll bar front and rear. The rear suspension also has an additional transverse link for greater wheel control. All the suspension arms are made of extremely rigid and durable forged aluminum. The front steering knuckles and the rear hub carriers are also made from aluminum forgings. The springs are straight rate with an extended rubber bump stop mounted on the chassis which acts as a progressive springing element at the limit of wheel travel.
The shock absorbers are nitrogen filled and feature a newly designed Honda Progressive Valve (HPV). The progressive opening of this valve produces a more favorable damping profile and more precise damping control than a conventional valve system in which the fluid control orifices are either fully opened or closed.
The front and rear suspension components are mounted on separate aluminum subframes. These subframes are castings mounted to the chassis by rubber bushings, designed to reduce vibration, yet limit flex and shift of the subframes relative to the chassis.
The suspension development program was far-ranging and took place at the Tochigi Proving Grounds, the Suzuka circuit and the 179-turn Nurburgring course in Germany. In addition to the standard evaluations conducted in-house by the suspension engineers, the car was subjected to evaluation by top-rank drivers such as two-time Formula One World Champion Ayrton Senna, Indianapolis 500 winner Bobby Rahal, and Formula One driver Satoru Nakajima.
The NSX is equipped with 4-wheel ventilated disc brakes and dual piston steel calipers. The diameter of the front and rear discs are 282 mm (11 in.). The braking targets were to set new standards of braking performance, fade resistance, provide good pedal feel, linear braking response and low pedal effort.
Four-Channel Anti-Lock Braking System
Developed by Honda R&D, this new 4-channel Anti-Lock Braking System controls each wheel independently with a new 16-bit micro-processor.This 4-wheel, independent capability allows fine control of the anti-lock function especially when the car is braking on a surface with a split coefficient of friction - for instance, if the left side wheels are on snow, ice or standing water and the right side wheels are on dry pavement.
The basic configuration is independent parallel hydraulic circuits. In addition to the primary, non-anti-lock braking circuit, the anti-lock system has its own hydraulic reservoir, pump, modulator unit, solenoids and control pistons. If a failure in the anti-lock hydraulic circuit should occur, normal braking force will be fully retained by the primary braking circuit.
Rack-And-Pinion Steering System
NSX models with the manual transmission are equipped with a manual, non-assisted rack-and-pinion steering system. To ensure maximum reliability, it features a sealed gearbox design.
Variable Electric Power-Assisted Steering System
Available only on the automatic transmission-equipped NSX, this power-assisted steering system is the first of its kind on the American market. The system consists of a rack-and-pinion steering gear with an electric motor installed concentrically around the steering rack. The steering system is a direct design which functions with no assist at higher vehicle speeds. A speed sensor in the electronic control unit determines road speed and, coupled with a steering sensor for torque and rotation, feeds a signal to the motor. To ensure reliability,the electrical system for this unit features goldplated connectors.
Forged Alloy Wheels
To further reduce unsprung weight and provide the highest strength possible, the engineers specified forged aluminum alloy wheels. To produce the wheels, a new facility was built exclusively for this purpose by Sumitomo Light Metals. The result is a very light wheel with the strength and impact resistance of a much heavier steel wheel.The rear wheels are 8x16inch, and the front wheels are 6-1I2 x 15 inch.Compared to cast aluminum, the total weight savingsof all four wheels amounts to 12 kilograms. (26.4 pounds).
The suspension engineers, working in conjunction with Yokohama TIre Company, sought to produce a tire that would allow the driver to readily "feel" the limits of the tires' performance.
As a result of computer design work and track testing, the tires on the NSX are not only different sizes front and rear (205/50ZR15 front,and 225/50ZR16 rear), but they also feature a different tread block configuration and different compounds front and rear. Called the A-022, the tires use a mixture of two compounds, the tread compound and the undertread compound. The tread compound contributes to wet and dry traction while the undertread compound contributes to handling stability, high-speed stability and predictable reaction to steering input.
1992 Acura NSX - Manufacturing
The new NSX assembly plant is the smallest of any Honda assembly facility and prides itself on having the slowest production rate: 32 cars per day are produced by the Tochigi plant's 200 associates. The associates were hand-selected; they each have a minimum of 10 years' experience and must have previously distinguished themselves in a significant manner. The central goal of this plant is to produce the highest-quality automotive product in the world.
This plant has no automated conveyor line. Rather, each car is mounted on a dolly and pushed by hand from one workstation to the next. Each team of workers is responsible for the quality of work performed at their station. The car is not passed on to the next area until the team is satisfied that their procedures have achieved the tolerances and goals required in the specifications.Each assembly station, in effect, becomes an inspection station.
1992 Acura NSX Prices And EPA Mileage
1992 ACURA NSX PRICES AND EPA MILEAGE
|.||Suggested Retail *Price||Mileage**Citv/Hwy|
|All information correct as of release date.
*Based on manufacturer's suggested retail price.
**Use for comparison purposes only. California figures are the same.
The two-seat, all-aluminum NSX sports car offers the performance and styling of a mid-engine exotic, but with the Acura reputation for reliability and quality. The 1994 NSX sports car features newly designed, larger-diameter wheels and wider, lower aspect ratio tires, giving the 1994 NSX an even more aggressive stance on the road than ever before. The NSX also features refined transmission gears for quieter operation.
The 1994 NSX comes in a new exterior color, Brooklands Green, in addition to Grand Prix White, Formula Red, and Berlina Black. A choice of either a black or a newly introduced tan leather interior is available.
A new top-of-the-line Legend Sedan GS model is a new addition to the 1994 Legend series of luxury automobiles.
The new Legend Sedan GS gets the same high-performance 230-horsepower Type n engine as the Legend Coupe and is available with either a 6-speed manual or 4-speed automatic transmission. The Sedan GS also features a Traction Control System (TCS), sport suspension, 16" wheels with all season high-performance tires, dual piston front brake calipers and a body-colored grille.
For 1994,both the Legend Sedan and Legend Coupe have been subtly restyled with redesigned grilles, front bumpers and front air intakes. Also in 1994, both Legend Coupe models feature a new high-mount brakelight integrated into the rear trunk lid, while the LS contains a new body-colored chin spoiler, side sill and rear bumper skirt.
All 1994 Legend models feature a new power tilt and telescopic steering system with tilt up and memory functions that operate in conjunction with the 8-way memory-equipped power driver's seat. Additional sound insulation in all 1994 Legends ensures quiet operation.
In 1994,Vigor LS and GS models feature interiors designed with new fine-finished wood trim on dash and door panels, which enhance the appeal of this personal sports sedan automobile. The Vigor LS has been upgraded to include a front passenger's air bag for 1994.The Vigor GS now features a new AM/FM stereo/cassette with 8 speakers and an in-dash compact disc player as standard equipment.
As the Acura entry-level model, the all-new, third-generation 1994 Integra Sports Coupe and Sports Sedan, has been completely redesigned to deliver even greater levels of sporty style, performance, comfort, advanced technology and unsurpassed customer value.
Both the Integra Sports Coupe and Sports Sedan are available in RS, LS and GS-R models, and all feature as standard equipment a driver's and front passenger's air bag Supplemental Restraint System (SRS). To offer sports-oriented drivers the practicality of a 4-door configuration, the performance oriented GS-R model is available for the first time in a Sports Sedan body style.
The Acura marque has achieved a reputation for quality and reliability, as evidenced by its ranking for three consecutive years as Best Overall Carline in the J.D. Power and Associates® Vehicle Performance Study, (SM) survey that measures driver satisfaction after three years of ownership. All Acura automobiles are protected by a 4-year/50,000 mile limited warranty. A nationwide network of nearly 300 dealers offers a full line of Acura models, including the NSX, Legend, Vigor and Integra.
1992 Acura NSX Specifications
1992 ACURA NSX
|ENGINE AND ELECTRICAL|
|Engine Type||3.0 liter, DOHC, 24-valve, V6|
|Horsepower||270 hp @7100 RPM - 5-speed
252 hp @6600 RPM - Automatic
|Torque, SAE net||210 lbs.-ft. (29.0 kg-m) @5300 RPM 5-speed and Automatic|
|Redline||8000 RPM - 5-speed
7500RPM - Automatic
|Fuel Cutoff||8300 RPM - 5-speed
7800 RPM - Automatic
|Bore & Stroke||3.54 in. x 3.07 in. (90 mm x 78 mm)|
|Displacement||181.6 cu. in. (2977 cc)|
|Induction System||Programmed Fuel Injection (PGM-FI) with Variable Volume Induction System|
|Valve Train||4 valves per cylinder, belt -driven, dual-overhead camshafts with VTEC (Variable Valve TIming and Lift Electronic Control System)|
|Engine Block||Aluminum alloywith cast-iron cylinder liners|
|Cylinder Heads||Aluminum alloy|
|Emission Control||3-way catalyst|
|Ignition System||Electronic Direct Ignition|
|Alternator||12V,110 Amp. Max|
|Battery||12V,68 Amp.lHr.,maintenance-free - 5-speed
12V,72 Amp.lHr.,maintenance-free - Automatic
|Recommended Fuel||Premium unleaded|
|Body Type||Aluminum unit-body|
|Front Suspension||Independent aluminum double-wishbone with coil springs,stabilizer bar and compliance pivot|
|Rear Suspension||Independent aluminum double wishbone with coil springs and stabilizer bar|
|Shock Absorbers||Hydraulic/gas filled, front and rear|
|Stabilizer Bars||0.7 in. (18.3 rom Front)
0.6 in. (17.5 rom Rear)
|Steering Type||Variable ratio rack-and-pinion-5-speed; Electric, variable power assisted,rackand- pinion-Automatic|
|Steering Ratios||18.2:1to 20.8:1-5-speed
|Steering Wheel Turns, lock-to-Iock||3.24-5-speed
|Turning Circle, curb-to-curb||38.2 ft. (11.6 m)|
|Wheels||Forged aluminum alloy 6.5 JJ x 15(Front) 8.0 JJ x 16(Rear)|
|Tires||Yokohama A-022 205/50 ZR15 (Front)
Yokohama A-022 225/50 ZR16 (Rear)
|Braking System||Dual-diagonal, power-assisted four-wheelventilated disc brakes; 4-channel Anti-Lock Braking System(ABS)|
|Front Disc||Ventilated, 11.1 in. (282 mm) diameter, 28 mm rotor thickness|
|Rear Disc||Ventilated, 11.1 in. (282 mm) diameter, 21 mm rotor thickness|
|Swept Area||Front:229 sq. in.(1480 cm2)
Rear:229 sq. in.(1480 cm2)
|Parking Brake||Rear, mechanical|
|Type||Transverse midship-engine/rear-wheel drive|
|Transmissions||5-speed manual||4-Speed automatic wilh programmed lockup torque converter*|
|Crankcase||6.7 U.S. quarts (6.3 liters) including filter|
|Cooling System||Manual transmission: 17.0U.S. quarts (16.0 liters)
Automatic transmission: 17.5U.S. quarts (16.5 liters)
|FuelTank||18.5U.S. gallons (70liters)|
|Passenger Volume*||48.9 cu.ft.|
|Cargo Volume*||5.4 cu.ft.|
|Total Volume*||54.3 cu.ft.|
|*Based on EP A volume calculation method.|
|EPA Fuel Mileage,City/Highway||19/24 (Manual)
|Wheelbase||99.6 in. (2530 mm)|
|Track,Front||59.4 in. (1510 mm)|
|Track,Rear||60.2 in. (1530 mm)|
|Overall Length||173.4 in. (4405 mm)|
|Overall Width||71.3 in. (1810 mm)|
|Overall Height||46.1 in. (1170 mm)|
|Minimum Ground Clearance||5.3 in. (135 mm)|
|Curb Weight:||30101bs. (1365 kg) - 5-speed
3098 Ibs. (1405 kg) - Automatic
|Weight Distribution, (% ) f/r||42/58 - 5-speed|
|Coefficient of Drag (Cd)||0.32|
|Coefficient of Lift (Cl)||0.05|
|Cd x A||0.57|
|Frontal Area||19.16 sq. ft. (1.78 sq. m)|
|Head Room||36.3 in. (921 mm)|
|LegRoom||44.3 in. (1126 mm)|
|HipRoom||53.8 in. (1366 mm)|
|Shoulder Room||52.5 in. (1334 mm)|
|Vehicle 3-year/36,000-mile limited warranty|
|Outer Body Rust-Through 3-year/Unlimited-milelimited warranty|